Price available on inquiry

Windlass Lighting System

The adding of LED to the windlass highlights its stylistic character, but at the same time it has the prior lighting function which is particularly useful to improve the use of the windlass with poor visibility. Is possible to control lighting through a standard fly-bridge switch that operate the control box or by means of the following MZ products: EV300, EV400 or Kompass radio control.

The “Windlass Lighting System” is a device designed to activate a 12V LED strip from a 24V battery.

During power on theLED stripis turned on fora brief momentand thensubsequently is switched off.The red LEDvisibleon top of thebox shows that correct voltage is applied.It’s possible to control the illumination of theLED stripwith two buttonsP1 and P2 (normally open) whose operationdepends on the working programset by thedip-switch SW1on the electronic board.

Set the working program before applying voltage to the unit (so when the “Windlass Lighting System” is off.


This site is registered on as a development site. Switch to a production site key to remove this banner.