TECHNICAL FEATURES
USE ONLY ON DIRECT CURRENT.MUST BE USED WITH CONTACTORS OR A CONTROL BOX
Feeding tension: 30 VCC Max Normally open contacts.
DON’T USE with a load more than 2 Amps.
Cable can be extended up to 4 mt. Ergonomic case moulded in self-xtinguishing polyester resin.
Watertight protection: IP 56 : remote controlIP 68 : plug and socket.
Remote control dimensions: 145x50x22 mm. I
NSTALLATIONALWAYS DISCONNECT THE BATTERY DURINGINSTALLATION!
If possible mount the socket in a dry place using the template below. Make the electrical connections according to the wiring diagram.
SETTING AND USE OF APPARATEDON’TOPENREMOTECONTROLORPLUGTOWARRANTYWATERTIGHTPROTECTION!
Connect the plug into the socket and turn its locking ring clockwise until it stops to switch on the remote control.
Switch on electrical power.
Be sure that the controls operate in the correct direction; if not swap over the UP and DOWN wires at the socket.
Push UP or DOWN command to use windlass. Release the button to stop. DON’T PUSH THE BUTTON SIMULTANEOUSLY!
