UC-I Sea water condensed chiller systems with variable capacity

Price available on inquiry

UC-I offers to the marine industry an innovative technology for high performances with variable climatic conditions and an optimization of the consumption on board of boats & yachts.
UC-I is the new range of inverter chiller with sea water condensed, as a result of only italian research, design and manufacturing.
The inverter chiller unit, equipped with made in Italy control box and electronic thermostatic valve, optimize the cooling performance on varying the thermal load, achieving the best efficiency (COP).
The advantages:
– Models available: UC-I32H (32000 BTU/h) e UC-I52H (52000 BTU/h)
– Ideal for application in building or refitting of big vessels, with three or more independent
– Italian electronics innovative and reliable also thanks to the availability of spare parts for the long term use in case of necessity
– Antilocking system of the pump with turned off chiller
– Stainless steel structure
– Low operating noise and vibration
– No inductive loads at start up
– Energy saving
– Ease for installation
– Integrated automatic fuses with manual reset
– Control box with prewired EMC protected cable loom, which can be installed a maximum of 0,8-1 m from the chiller unit

 

The models UC-IN32H e UC-IN52H are equipped with a variable frequency brushless compressor that incorporates an inverter.
Moreover, an innovative electronic controller which manages all the functions of the chiller as well as the failures diagnostics through well-defined alarm codes. Electrical box can be installed remotely from the unit, up to 1,20m. Each unit is pre-charged, leak checked and tested in all operating modes at the most critical conditions. All Thermowell marine air conditioners are filled up with green refrigerant R410A and no further charge is required before the installation on board.

 

Model UC-I32H UC-I52H
Normal cooling capacity BTU/h 9000-32000 15000-52000
Normal cooling capacity W 2,7 – 9,3 4 – 15,2
Power Supply 230/1/50-60Hz 230/1/50-60Hz
Power Consumption A 2,9 – 12 3,9 – 14,2
Fresh water flow m3/h 1,8 2,2
Sea water Flow m3/h 1,9 2,8
Sea water Temperature (heating mode) >5°C >5°C
Sea water Temperature (cooling mode) <38°C <38°C
Sea water connections 3/4″/19mm 3/4″/19mm
Chilled water connections 3/4″/19mm 1″/25,4 mm
Refrigerant Charge g 1000 1200
Net weight kg 48 55
Sizes LxPxH mm 400x400x490 400x400x490
Control Box sizes LxDxH mm 300x230x150 300x230x150
Cable length control box m 0,8 0,8
Recommended fuse size A 20 25
Drain connection mm 16 16
*Specification and availability are subject to change without notice.
Chiller units include control box and display. Capacities are rated at an evaporating temperature of 7,2°C
and a condensation temperature of 38°C. Dimensions of the chillers are without control box. Fresh water flow depends on amount of air handlers.
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.