TECHNICAL FEATURES
USE ONLY ON DIRECT CURRENT.MUST BE USED WITH CONTACTORS OR A CONTROL BOX
Feeding tension: from 9 to 30 VDC. 9 Normally open contacts.
DON’T USE with a load more than 2 Amps.
Cable can be extended up to 4 mt.
Ergonomic case moulded in self-extinguishing polyester resin.
Watertight protection: IP 56 : remote controlIP 68 : plug and socket.
Remote control dimensions: 140x60x20 mm.
INSTALLATION ALWAYS DISCONNECT THE BATTERY DURINGINSTALLATION!
If possible mount the socket in a dry place using the template below.
Make the electrical connections according to the wiring diagram.
SETTING AND USE OF APPARATE DON’T OPEN REMOTE CONTROL OR PLUG TO WARRANTY WATERTIGHT PROTECTION!
Connect the plug into the socket and turn its locking ring clockwise until it stops to switch on the remote control.
Switch on electrical power. Be sure that the controls operate in the correct direction; if not swap over the UP and DOWN wires at the socket.
Push UP or DOWN command to use windlass.
Release the button to stop.
DON’T PUSH THE BUTTON SIMULTANEOUSLY
