PIRANHA P6 NITRO | SURFACE MOUNT

Price available on inquiry

PIRANHA P6 Nitro Underwater Light

produces 3720 fixture lumens.

Compact low profile design is perfect for

all boat types, suitable for transom and

side mounting on all hull types.

Switch on for normal power, for Nitro

power turn off then back on and the

brightness is boosted by 35%.

Incredibly simple to install just one small

cable entry hole and 3 mounting screws.

Reverse polarity protection with in built

driver technology and active thermal

rollback.

Suitable for in and out of water use.

RINA Type approval

2-Year Warranty

Mounting Type Surface

Hole cut out size 15mm

Maximum Lamp Lumens 4600

Fixture Lumens 3720

Max Wattage 40 watts

Typical Life Expectancy 50,000 Hours

Voltage 12v or 24v (Dual Colour 12v only)

Power Draw 3.5 amps @ 12v / 1.8 amps @ 24v

Protection Over / Under Voltage, Over Current, Reverse Polarity protection, Active

thermal protection. Hydro block technology.

Fixture Profile 17.6mm

Fixture Diameter 110mm

Lens Type 3mm Optical grade high impact polymer, Guard X Coating

Fixture Material AB2 Bronze (standard) or Aluminium

Beam Angle 60 Degree

Warranty 2 Year

Type Approval RINA IEC 60529

Available Colours

Diamond White 6500k

Cobalt Blue

Dual Colour White/Blue

Suitable Use Above & below the water-line

Spacing 1.2 – 2mtr

Driver Type Integral

Total weight 800 gm

Attached cable length 2 mtr Over-moulded

Included in box In-line fuse holder & rated fuse, Gel connector, Inline Crimps, Heat shrink,

Fixing Screws, Template and installation instructions

Junction Box 4 Way IP68 Wiring Junction Box

BL-Switch Panel mount illuminated switch & wiring loom

220/110v Power Supply Power supply 24v

I.Y.S Lighting Control Control via MFD screen or mobile device

All Piranha models now available in aluminium finish to suit aluminium/composite hulls

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.